122 research outputs found
Wavelength reconfigurability for next generation optical access networks
Next generation optical access networks should not only increase the capacity but also be able to redistribute the capacity on the fly in order to manage larger variations in traffic patterns. Wavelength reconfigurability is the instrument to enable such capability of network-wide bandwidth redistribution since it allows dynamic sharing of both wavelengths and timeslots in WDM-TDM optical access networks. However, reconfigurability typically requires tunable lasers and tunable filters at the user side, resulting in cost-prohibitive optical network units (ONU). In this dissertation, I propose a novel concept named cyclic-linked flexibility to address the cost-prohibitive problem. By using the cyclic-linked flexibility, the ONU needs to switch only within a subset of two pre-planned wavelengths, however, the cyclic-linked structure of wavelengths allows free bandwidth to be shifted to any wavelength by a rearrangement process. Rearrangement algorithm are developed to demonstrate that the cyclic-linked flexibility performs close to the fully flexible network in terms of blocking probability, packet delay, and packet loss. Furthermore, the evaluation shows that the rearrangement process has a minimum impact to in-service ONUs. To realize the cyclic-linked flexibility, a family of four physical architectures is proposed. PRO-Access architecture is suitable for new deployments and disruptive upgrades in which the network reach is not longer than 20 km. WCL-Access architecture is suitable for metro-access merger with the reach up to 100 km. PSB-Access architecture is suitable to implement directly on power-splitter-based PON deployments, which allows coexistence with current technologies. The cyclically-linked protection architecture can be used with current and future PON standards when network protection is required
PROaccess : a passive-components-based reconfigurable WDM-TDM optical access network
The evolution of optical access networks have focused on improving their transmission capacity by increasing transmission bit rate per wavelength and number of wavelengths per fibre. However, the huge aggregated capacity is composed by separate bandwidth pools in which each wavelength channel is an independent pool. As a result, some wavelengths may be congested while others are underutilization. In order to allow the system capacity to be a single bandwidth pool, the wavelength reconfigurability is required in which an user can be relocated to another wavelength if the current wavelength is congested. Adding reconfigurable feature also adds complexity, hence CAPEX and OPEX to the networks. Therefore, networks operators up to now have been reluctant despite of benefits of the flexible bandwidth delivery. In this paper, we propose a cost-effective, reconfigurable optical access network by employing passive network components in the remote node and dual conventional optical transceivers in ONUs. The novel approach allows outside plant totally passive and ONUs without tunable filters and lasers. Despite of using only passive and non-tunable components, it still attains a superior flexibility. The architecture is demonstrated with the bidirectional transmission at 10 Gb/s symmetrically
Optimization of existing access networks with low-cost multilevel modulation formats
PON networks are designed around a minimum received power level. The actual use of power budgets in a PON typically varies widely. Utilizing multilevel modulation for ONUs that have high power margins can increase network capacity utilization without investing in expensive optics. In this paper we present statistics from a commercial GPON network and demonstrate that a capacity increase is possible for a majority of the users. Even users with a low power margin can benefit from multilevel modulation, if smart distribution of timeslots among users is utilized
10-Gb/s transmission over 20-km single fiber link using 1-GHz RSOA by discrete multitone with multiple access
We demonstrate a novel 10.5-Gbit/s transmission scheme over 20-km single fiber link by using a remotely fed 1-GHz reflective semiconductor optical amplifier (RSOA). Discrete multitone (DMT) modulation with adaptive bit-/power-loading is applied to overcome the bandwidth limitation of the RSOA. Transmission performance of the proposed scheme is analyzed in terms of various system parameters, such as the nonlinearity of the RSOA, optical signal-to-noise ratio of the optical seed carrier, the overhead size impact on dispersion, the number of DMT subcarriers, and the reflection noise from the single fiber link. We also report flexible-bandwidth-allocated multiple access operation based on the proposed scheme. The throughput for all cases is approximately 10 Gbit/s with BER <10-3
Recent research advancements in in-building optical networks
For in-building communication, a powerful backbone network can be created by means of optical fibre, which in a single infrastructure can offer a wealth of both fixed and wireless service connections to the users. Next to the technological challenges, important aspects to be taken into account are the economics of network installation and operation, and sustainability. An overview is given of recent research results regarding the optimization of network architectures, and regarding advanced signal processing for economical and sustainable delivery of high-capacity wired and wireless services over various types of multimode (plastic) optical fibre
Phorbol Esters and SDF-1 Induce Rapid Endocytosis and Down Modulation of the Chemokine Receptor CXCR4
The chemokine receptor CXCR4 is required, together with CD4, for entry by some isolates of HIV-1, particularly those that emerge late in infection. The use of CXCR4 by these viruses likely has profound effects on viral host range and correlates with the evolution of immunodeficiency. Stromal cell-derived factor-1 (SDF-1), the ligand for CXCR4, can inhibit infection by CXCR4-dependent viruses. To understand the mechanism of this inhibition, we used a monoclonal antibody that is specific for CXCR4 to analyze the effects of phorbol esters and SDF-1 on surface expression of CXCR4. On human T cell lines SupT1 and BC7, CXCR4 undergoes slow constitutive internalization (1.0% of the cell surface pool/min). Addition of phorbol esters increased this endocytosis rate >6-fold and reduced cell surface CXCR4 expression by 60 to 90% over 120 min. CXCR4 was internalized through coated pits and coated vesicles and subsequently localized in endosomal compartments from where it could recycle to the cell surface after removal of the phorbol ester. SDF-1 also induced the rapid down modulation (half time ∼5 min) of CXCR4. Using mink lung epithelial cells expressing CXCR4 and a COOH-terminal deletion mutant of CXCR4, we found that an intact cytoplasmic COOH-terminal domain was required for both PMA and ligand-induced CXCR4 endocytosis. However, experiments using inhibitors of protein kinase C indicated that SDF-1 and phorbol esters trigger down modulation through different cellular mechanisms
Rate-equation calculations of the current flow through two-site molecular device and DNA-based junction
Here we present the calculations of incoherent current flowing through the
two-site molecular device as well as the DNA-based junction within the
rate-equation approach. Few interesting phenomena are discussed in detail.
Structural asymmetry of two-site molecule results in rectification effect,
which can be neutralized by asymmetric voltage drop at the molecule-metal
contacts due to coupling asymmetry. The results received for poly(dG)-poly(dC)
DNA molecule reveal the coupling- and temperature-independent saturation effect
of the current at high voltages, where for short chains we establish the
inverse square distance dependence. Besides, we document the shift of the
conductance peak in the direction to higher voltages due to the temperature
decrease.Comment: 12 pages, 6 figure
Tight-binding parameters for charge transfer along DNA
We systematically examine all the tight-binding parameters pertinent to
charge transfer along DNA. The molecular structure of the four DNA bases
(adenine, thymine, cytosine, and guanine) is investigated by using the linear
combination of atomic orbitals method with a recently introduced
parametrization. The HOMO and LUMO wavefunctions and energies of DNA bases are
discussed and then used for calculating the corresponding wavefunctions of the
two B-DNA base-pairs (adenine-thymine and guanine-cytosine). The obtained HOMO
and LUMO energies of the bases are in good agreement with available
experimental values. Our results are then used for estimating the complete set
of charge transfer parameters between neighboring bases and also between
successive base-pairs, considering all possible combinations between them, for
both electrons and holes. The calculated microscopic quantities can be used in
mesoscopic theoretical models of electron or hole transfer along the DNA double
helix, as they provide the necessary parameters for a tight-binding
phenomenological description based on the molecular overlap. We find that
usually the hopping parameters for holes are higher in magnitude compared to
the ones for electrons, which probably indicates that hole transport along DNA
is more favorable than electron transport. Our findings are also compared with
existing calculations from first principles.Comment: 15 pages, 3 figures, 7 table
Operation and performance of the ATLAS semiconductor tracker
The semiconductor tracker is a silicon microstrip detector forming part of the inner tracking system of the ATLAS experiment at the LHC. The operation and performance of the semiconductor tracker during the first years of LHC running are described. More than 99% of the detector modules were operational during this period, with an average intrinsic hit efficiency of (99.74±0.04)%. The evolution of the noise occupancy is discussed, and measurements of the Lorentz angle, δ-ray production and energy loss presented. The alignment of the detector is found to be stable at the few-micron level over long periods of time. Radiation damage measurements, which include the evolution of detector leakage currents, are found to be consistent with predictions and are used in the verification of radiation background simulations
- …